The Three Greatest Moments In Window Handles History
Upvc Window Handles Replacement
It is relatively simple to replace your window handle. You will only need some tools and a few steps. The most important thing to do for successful replacement is to identify the type of handle you want and measuring the length of the spindle.
There are two kinds of handles made from upvc: Cockspur and Espag handles. Espag handles have a square 7mm spindle that engages with the locking mechanism attached to the frame.
Espag handles
Espag handles are one of the most popular kinds of window handles available for Upvc windows and some timber frames too. They are designed to be used with espagnolette multipoint locking systems. They feature a 7mm square spindle that extends from the back of the handle and is then inserted into the gearbox of a multipoint lock within the window. They come in a variety sizes for spindles. This is because each type of window handle is fixed to a different multipoint locking system, which has a slightly different design and layout of the gearbox.
The typical specifications for espag window handle repairs handles include a push-button to lock the 'locked' position, key-locking and non-locking fire escapes (where is required). Some even meet Secure by Design standards, which will give you extra security. They are usually fixed to the sash by two screws spaced 43mm apart.
There are several variations of the espag handle. The most prominent is the in-line design or cranked. In-line handles can turn both ways while those that are cranked only functional in the direction of the window's movement (i.e. They can be put in place either clockwise or counter-clockwise. They can be fixed to the window in any way, but it is essential that they are pointed in the same direction as the old cockspur handle was.
When you are choosing an alternative window handle it is essential to be thorough and take measurements of the spindle. The spindle is a metal bar that extends from the back of the door handle. It could be any length from 10mm up to 55mm. It is the length that is visible when the handle is together in its original state. This is the length you will need to match when purchasing a replacement handle, as the spindle drives the lock in the window.
Certain manufacturers offer a magnetic espag handles that remove the need to cut spindles in order to fit. This can simplify the fitting process since it is quicker and easier to take out the replacement and replace it with another. You should still take the time to measure the spindle to ensure that the handle will work smoothly.
Cockspur handles
Cockspur handles can be found on older uPVC or aluminium windows. They do not come with a locking mechanism, but they are considered safe as the handle's nose is closed into a wedge-shaped block that is fitted to the frame of the window handles and locks. (This type of handle is not to be confused with timber frames that feature an opening). Cockspur handles are still popular and come in various styles to fit any type of doors.
They are a simple and cost-effective option, and they can be key-locked to satisfy home insurance standards. You can also choose the handle height to suit your frame. A lockable version is also available that adds an additional level of security to the window and has been approved by Secured by Design.
These types of handles are attached to the sash of the tilt-and-turn or casement side of the window using a spindle that runs through the baseplate. The handle is operated using a lever either side and the handle spindle engages by a wedge for striking that is attached to the frame of the window. Cockspur handle kits are usually offered with right and left hand versions and there is an array of nose heights that will fit most frames.
The correct wedge block size is the key to an efficient installation. It is essentially a small block of plastic designed to look like a ramp and you can replace the old one with one of a slightly larger size to ensure that the handle closes precisely across the gap of the window, sealing it against draughts. The fixing positions of these handles are standard and usually range between 38mm and 58mm in diameter. You should be able to find the correct replacement without much trouble.
Another thing to think about when choosing a new set of cockspur handles is the spindle length. It is the distance from the baseplate of the handle to the point where the shaft of the handle extends down through the sash to the frame. It is important that this is precise so that the handles function smoothly.
Tilt and Turn Handles
These handles are specifically designed for tilt-and-turn windows. They are available in nonlocking, locking or tilt safe choices. They are hefty operating handles with a firm grip and detents at 90 degrees. They are available in a variety of finishes that include black, white chrome, brushed satin and chrome. They are suitable for timber or PVCu tilt and turn windows.
These handles are able to replace the cockspurs made of upvc on older windows that don't have locking. However, be aware that these handles are different to upvc espag handles as they aren't locked and work in a different way.
They come with the "turn before tilt" mechanism that allows the window to be opened inwards and then dropped down into a ventilation or hopper style position for fresh air. This kind handle is also referred to as a DK or dry-keep window handle. It is commonly found on older double-glazed windows, whether in residential or commercial properties.
When replacing a tilt and turn window handle, there are a few points to be aware of. First, you must make sure that the new handle is suitable for your windows. This includes examining the spindle length. The length of the spindle is the length of the steel rod that extends from the handle and into the locking mechanism. The longer the spindle is, the more security it can provide.
The handle is usually connected to the frame or the base of the window using a screw located above or below it according to the design of the window. The screws can be removed using a screwdriver and the handle can be removed. It is recommended to open the handle first in order to make it easier to access both screw holes.
After the handle is removed, you should be able observe two screws that need to be removed. This will reveal some decorative caps. These can be unscrewed with the flat-head screwdriver, and then the handles can be removed. The screw cap can be replaced once the handles are in their new position on your windows.
Find the length of the spindle.
The spindle of a window handle determines the method by which it opens and close. Different types of handles have different spindle lengths. It's essential to measure the length of your old handle prior to purchasing a new. This will ensure that your new handle will fit the window correctly, and be easy to open and close.
If you are looking to replace your handles or enhance the appearance of your uPVC window the design of the handle will have a major impact on the way the window opens and closes. There are many different types of handles, such as inline espagnolette, cranked and key locking. In addition there are tilt and turn handles, which are designed for use with tilt-turn upvc window handle repair windows which can be opened in two ways.
To replace the window handle first, you must locate the screw caps which hold it in place. They are typically located either above or below the handle, and can be removed using a screwdriver. After the screws have been removed, you are able to remove the handle from the window frame.
The handle can be removed from the window frame and replaced with a brand new one. Be sure that the new handle is in the same place as the old handle and that the spindle aligns correctly with the lock mechanism. After the new handle has been installed, it's the time to fix the handle by installing the screws. You can then place the caps back on If they're missing.
It may be necessary to change the handles on your uPVC window when they break. The handle may break as a result of a powerful impact or the female part that the spindle's head is located in could be worn down. This can be caused by someone in your household forcing the handle while it's locked.
The best method to replace your window handle with uPVC is to get a high quality one that lasts for many years. This will save you money in the end. In addition it will give your house a a more attractive and modern appearance.