The 10 Most Terrifying Things About Subaru Replacement Keys

how to get replacement subaru key to Get a New Key for Subaru

If your Subaru has keys, you can lock and unlock it at the push of the button. However, if the key fob is tossed into the ocean or takes a bath in the washing machine you might be thinking about how to get it working again.

Fortunately, our Stocker subaru key programming software dealership has a few suggestions to assist you. First, you'll want to open the key fob case and look for the circuit board that controls the transmitter inside.

How do I obtain a new key

Finding a new key for the Subaru is much simpler than you think. You can purchase a new key from a dealer, locksmiths, or online. The cost is contingent on where you get the key, and if it has to be programmed. It also depends on the type of key (transponder or smart fob? Push to start? Regular non-transponder?)

If you're in search of an alternative key for your car, it's best to contact an auto locksmith that specializes in subaru lost keys cars. They'll be familiar with the unique key fobs and the specific key programming that goes with them. You can find out the kind of key you have by checking the sticker on your car's windshield.

Certain keys also have features such as Remote Start that allow you to start your vehicle from the at-home comforts of your home. However, you'll need have the VIN number for your vehicle, which is found on the label in the door of the driver or in the owner's manual.

Subaru models manufactured after 2000 come with a transponder key that disables the computer in the engine. These keys can't be copied with the same machines that cut traditional metal keys, so you'll have to visit a locksmith or dealership for replacements. A new key is typically priced between $50 to $250, depending on the type of key and the features.

How to get a Replacement Key

You can obtain an alternative Subaru key in a variety of different ways, based on the model of your car (chip remote, intelligent or "push-to-start" remote or regular keys made of metal). You can purchase an online replacement key or contact the dealer you bought the vehicle from, or an auto locksmith that has the right equipment to make this kind of key. You can order a replacement key from your dealer. It will be guaranteed to fit the vehicle you purchased it, will be covered by warranty, and will be programmed for the specific model of your vehicle.

For a chipkey dealer to have the codes for the specific vehicle you own, which is only possible at the dealership where you purchased the vehicle. This can be a challenge as you'll need to take your car there or have a locksmith come and code the key.

Most hardware stores and locksmiths offer a wide selection of blank keys. To remove the battery, you'll need to employ a flathead screwdriver. a key made of metal. Replace the old battery by an CR2032 coin cell, and snap the encasement in place.

How do I obtain a key fob

A key fob, also referred to as remote control, is a tiny device that allows access to the electronic systems of your vehicle. They can unlock and even start your vehicle, lock it, activate the alarm, and more. You may have to replace your Subaru key fob if it is not working properly. You must ensure that you choose the correct fob for your vehicle. Consumer Reports says that off-brand fobs can be a problem for the immobilizer system of your car.

It's possible that your subaru keys lost utilizes a smart-key system. These require special programming to be compatible with your vehicle. The dealer should be able do this, and your warranty or roadside service program may cover the cost.

Older Subaru models come with a standard metal lock which can be duplicated in a hardware store. You can also buy blanks from online retailers that sell subaru chip key replacement key with the subaru Replacement keys logo.

If your older Subaru has an issue with the battery you can fix it at home, without having to visit an expert mechanic or paying for a key duplicate service. Look for a small crevice in the seam between the front and back of the fob. Use a flathead tool to break apart the two halves. There's a flat battery inside. Replace the old battery with one of 2025's Make sure the correct side is facing up. Insert the key made of metal into the slot and snap it together.

How to replace the Key Fob

In the past it was commonplace for people to buy the key fob at a bargain price at a hardware store or online and take it to a locksmith or dealer to be cut and programmed. It's still possible to do this, however it's better to go through the dealer. This will stop the key from being copied, and also ensure that the new key fob is correct for your vehicle. This is especially crucial if you own an older model that requires specialized programming such as the ones that come with features like auto-parking and window rolling.

These fobs are handy to use when driving your Subaru in Gilroy but can be a nuisance when the buttons stop working. Fortunately replacing the battery on your key fob is easy, and you can even do it yourself if know how.

Start by finding the small space between the front and back of your key fob. Use a flathead screwdriver or the tip of a screwdriver made of steel to remove the fob and search for the round flat battery. Take out the old battery and then place a brand new 2032 battery into its place, making sure that it's in the same direction that the original one. Then, put your fob back together.

In the near future, your car keys may be replaced by "smart" keys that offer more features. You can still enjoy the features of your Subaru key fob until then. It will automatically open your window as long as your engine is running.