Twenty Myths About Automotive Key Repair: Busted

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition

We've all been there when the car's key doesn't turn on the ignition. It occurs at the most inconvenient moments, like when you're loading your car with groceries or returning home from work.

Rather than panic instead, there are a variety of solutions to get you back on the road. Here are a few common key issues with cars and solutions:

Broken or bent keys

A bent remote key repairs is the most frequent reason why car owners are unable to start their vehicle. This can be repaired by simply bending the key. It may sound simple, but it is important to do it with care. The key is very thin and may break if bent even a little.

To accomplish this, you'll require an area that is stable, as well as a pair of pliers. Hold the key on one end with the pliers and bend it until it is straight. It is recommended to do this on the floor or in a vice. Then, you can put it into the lock to see if it changes.

If not, you might require a new one created. You don't need to call a lock-smith and your existing key will work.

It's a good idea to keep a spare in your pocket, so you don't have access to your vehicle in the event of a broken key.

If you are having trouble inserting a bent or broken lock key, try applying some oil to it. This will make it easier to move through the cylinder and will prevent it from getting stuck. Spray graphite powder or lubricant. Make use of the plastic tube which comes with the spray for an even more precise application. This will also help prevent moisture from ruining your key.

Spring pins and springs with pins

Sometimes, a pin (also known as a roll pin) or spring can get stuck. A pin is a small piece of steel that measures between 5.1 and 7.6 cm (2.5-3.0 in) long, with hollow ends. It is used to connect two pieces of an equipment. In most instances, it is possible to remove pins by simply pulling it out with your fingers or a wrench.

If you own a newer car that uses keys with microchips in it, there's a chance the key needs to be programmed to work with your vehicle. This process is different based on the manufacturer and car.

If you require assistance with your automotive keys or locks, give us a call! We can repair, replace or program almost every vehicle key.

Gear Selector

If your car key and repair's gear selector gets stuck in park mode, you need to get it checked by a mechanic right away. It's a safety concern and you could cause serious damage to your vehicle if you continue to drive it. This is also a sign of bigger problems with the transmission system itself, which could be costly to repair key.

Most times the issue is fixable. The most common reason the gear selector could be stuck is because one of the cable ends has snapped or disconnected from the lever itself. The mechanic can repair this in a few minutes.

In some instances, the bushings on the gear selector might be damaged or worn. Rubber covers are placed around the joints of the gear system to keep it fluid. These covers work similarly to cartilage joints, which is why they need to be healthy and flexible.

It is not uncommon for them to degrade over time, however there are a few things you can do to extend their lifespan. First, you should stay clear of using the gear selector in extremely cold weather. This is because the cables that control the gear are often prone to freezing and cracking. You should also replace the bushings with high quality ones, like the ones from First Line.

These bushings are an essential component of your gear selector and should not be overlooked. If you find that yours is wearing out, it's a great idea to visit an auto repair shop that specializes in Land Rover repairs. They will help you find the right parts to fix the gear selection system. They can also provide you with a range of other services, like maintenance and service for your transmission.

Dead battery

If you turn the ignition on and hear only a click, then your battery is dead. As batteries age, they undergo an natural process that causes them to die prematurely. This is due to the negative plates in your car battery will start to be coated with crystals of sulfate.

A dead battery can also cause the loss of electrical power within your vehicle and cause the radio or the electric windows to stop working. If you have been having difficulties starting your car in cold weather this could be a sign you require a new battery.

It's possible that the issue is not caused by an unresponsive battery but an issue with the charging system. This problem can be resolved by having your mechanic verify that the alternator, serpentine belt, and battery cables all work properly.

Another common automotive key repair is the key fob that isn't working properly. The key fob is a small unit that connects to the computer in the vehicle and relays commands and signals between the engine and accessory systems. This system can become confused or stop communicating if it is submerged or is exposed to extreme temperatures.

Follow the directions in your owner's guide to reset the keyfob that was lost. Depending on the vehicle it could involve opening and closing the doors, turning the lights and other electronic devices on and off by pressing a particular sequence of buttons. If this doesn't solve your fob it may require professional programming which requires the help of an expert. However, it's still worth trying these simple steps before you decide to pay for a new device.

Ignition socket

Modern car keys include an embedded transponder chip in them that sends a signal to a receiver in the ignition when it is inserted. This signal tells the immobilizer on the car key repair if the key is the correct one to allow it to start. In the 1990s theft of cars became such an issue that the majority of manufacturers fitted this transponder security system into their vehicles for security and insurance purposes.

If you have a brand newer vehicle, the only option to replace your key could be at the dealership or by contacting the manufacturer directly. Note down the VIN (vehicle ID number) of your car prior to you leave. This number can be found on the dashboard, the door jamb or in the owner's guide.

Bring your current key along to a participating AutoZone store, and an associate will utilize machines to trace the contours of your blank key to accurately duplicate the original key. The new key repair near me will be cut on-site with a precise cutting machine. If your key is equipped with an edge, a fob or a large grey or black head it will need to be programmed to your car before you can start the motor.