How to add superjump to a char

[Fallen_Angel]

I've read many users asking  for the superjump, so I decided to make a little tutorial, fist these goes in the cns

Code: [Select]

;Super Jump
[Statedef xxx]; change these for the number that you want
type = A
movetype = I
physics = N
anim = 40 ; these is the jump anim
velset = 0,0
ctrl = 0


[State 0, ]
type = VarSet
trigger1 = Time = 0
sysvar(1) = 0

[State 0, ]
type = VarSet
trigger1 = command = "holdfwd"
sysvar(1) = 1

[State 0, ]
type = VarSet
trigger1 = command = "holdback"
sysvar(1) = -1

[State 0, ]
type = VelSet
trigger1 = animtime = 0
x = ifelse(sysvar(1)=0, const(velocity.jump.neu.x), ifelse(sysvar(1)=1, const(velocity.jump.fwd.x), const(velocity.jump.back.x)))
y = const(velocity.jump.y)*1.7 ; you can change these value, to make it fit how you want the superjump


[State 0, ]
type = ChangeState
trigger1 = animtime = 0
value = 50
ctrl = 1

and these goes in the cmd


[Command]
name = "DU"
command = D, U
time = 10

[State -1, super jump ]
type = ChangeState
value = xxx
trigger1 = command = "DU"
trigger1 = ctrl ; these means that you can make the move when you control the char
trigger1 = statetype != A ; these is to make that you cant use the superjump while you are in the air
; If you want to make a launcher you can use these
trigger2 = (stateno = yyy) && (movehit) && (command = "holdup") ;yyy right here is the stateno for your lancher

If you have any question about these I will try to help you

[A!]

does this tell you how high you want him to jump to because what if i want him to jump higher than he usualy does.... talkin about editing a character

[Fallen_Angel]

the code that I put is, the superjump from marvel vs capcom, if you want to change the normal jump, in the cns you have to edit these value.

[Movement]
airjump.num = 2    ;Number of air jumps allowed (opt)
airjump.height = 50  ;Minimum distance from ground before you can air jump (opt)
yaccel = .44         ;Vertical acceleration
stand.friction = .85  ;Friction coefficient when standing
crouch.friction = .82 ;Friction coefficient when crouching

[A!]

airjump.height = 50  ;Minimum distance from ground before you can air jump (opt)

so this is how high he goes up

[Fallen_Angel]

Tupac, youre right thats it

[puissance]

Hi Fallen Angel,

I tried your superjump technique on several characters and it worked flawless.  Thank you so much.  However, when I tried putting the code on Ryu LVL2, he keeps doing the superjump without me doing anything.     Hope you can help me out on this.   I am very much a newbie, so I am learning as I go.  Thanks

[Fallen_Angel]

puissance, I think that the error could be that you are repeating the statedef number, try changin it, if it still doesnt work, send me the char and I will tell you what is the problem

[megaman781]

do you know what can go here: value = xxx
some characters get the super jump, but the normal jump is the same as the super what can i do?

[Fallen_Angel]

do you know what can go here: value = xxx
some characters get the super jump, but the normal jump is the same as the super what can i do?

the value has to be the same number as the statedef.

I dont know what could be the problem. Can you tell me one char that has the problem??.

maybe the problem could be these


[Movement]
airjump.num = 2    ;Number of air jumps allowed (opt)
airjump.height = 50  ;Minimum distance from ground before you can air jump (opt)
yaccel = .44         ;Vertical acceleration
stand.friction = .85  ;Friction coefficient when standing
crouch.friction = .82 ;Friction coefficient when crouching

[M79]

I uh, cut and pasted the information into the right files, saved, and I never got any super jump. =\

[nick09]

you can't just cut and paste......

[M79]

you can't just cut and paste......

What exactly do I do then? 

[nick09]

read the coding.

see the x's here?

Code: [Select]

;Super Jump
[Statedef xxx]; change these for the number that you want
it can't just be x's.

also the
[State 0, ]

in the cns each must be like

for example.
[State 0, 0], [State 0, 1]

and so on.

[dimension_w]

I've done it no problem. But I was wondering how you make it so you can super jump diagonally left and right as well, if I want my char to be able to leap over tall enemies. Jumping straight up doesn't really help

[Fallen_Angel]

I uh, cut and pasted the information into the right files, saved, and I never got any super jump. =\

change al the xxx , for numbers like 123, or whaterever just make sure to not repeat statedef

I've done it no problem. But I was wondering how you make it so you can super jump diagonally left and right as well, if I want my char to be able to leap over tall enemies. Jumping straight up doesn't really help

If you noly want to make the superjump diagonally modify the vel on x. but if you want to make the superjump that can move in the air (its like diagonally), you can add these to your statedef -3, these code will add velocity to your jump


[State -3,veladd]
type = Veladd
triggerall =command = "holdfwd"
triggerall = prevstateno = xxx ; the superjumo state
trigger1 = stateno = 50; jump state
x = .2 ; maybe you need to modify these value

[State state-3,veladd]
type = Veladd
triggerall =command = "holdback"
triggerall = prevstateno = xxx
trigger1 = stateno = 50
x = -.2

the code means that when you made the superjump, if you hold fwr or back while you are jumping you will add velocity to your char

I hope that helps.

[dimension_w]

It works perfectly. Thanks mate.

[dimension_w]

I have another little query.  It sounds simple enough but I need to be sure, how would we go about adding in a dust cloud on the floor as you super jump? And also where would the plysnd go?

[Fallen_Angel]

To make that you need to add an explod like these

[State xxx, x] ;Dust Spark
type = explod
trigger1 = Animelem = 1 ; the first sprite of the anim
anim = xxx ; the anim of the dust
pos = 0,0 ; the position, maybe you need to adjust these
sprpriority = 4
ownpal = 1

and for the sound use a playsnd, and use the same trigger

[Jelux Da Casual]

how can i combine a launcher into this superjump? I know I can adjust the value of the attack's vertical, but can I add a chase value to it using this code?

[Fallen_Angel]

To make  a launcher you need to add these to the statedef of the hit

[state xxx, jump combo]
type = changestate
trigger1 = movehit ; when you hit the opponent
trigger1 = command = "holdup"
value = xxx ; the superjump state
ctrl = 1 ; these menas that you re-gain control

[Jelux Da Casual]

[State xxx, jump combo]
is xxx the superjump value or the attack's value, and at what part do I put this in?

[Fallen_Angel]

You can put whaterever number on the state xxx (for example state 123), it doesn't affect, its just to identify if you make a mistake, it would affect if it was statedef


you add these to the statedef of the hit

[MysticBlade]

sprpriority = 4

sprpriority is layer right?

[Fallen_Angel]

sprpriority its the priority of the sprite, 

[MysticBlade]

ohhhh so i think i get it now. sprpriority 4 will follow after spripriority 3 is that correct?